Loaders

Our Most Popular Loader/Unloader

Toellner Loader3
This is a floor-mounted unit, which is lagged to the floor in the space normally occupied by an operator. The unique and trademark feature of this Toellner loader/unloader is its ability to enter the machining envelope through a Toellner-fabricated access door (as opposed to using an auto door/open close unit), saving valuable seconds in the load/unload cycle. Equipped with end-of-arm tooling designed around your part, the upper assembly enters through the access door to complete the load/unload cycle in as little as five seconds. Also unique to the Toellner loader is our rotating pedestal which can be unlatched and pivoted clear of the door, allowing easy access to the lathe work envelope for tool maintenance or short runs. This loader utilizes servo technology and compressed air, which allows for its extremely fast and smooth operation. The air is channeled through a soft-start regulator, which allows the unit to be brought up to pressure smoothly avoiding all sudden movements of the air cylinders insuring operator safety. The control cabinet, housing an Allen Bradley programmable controller, is located on the loader frame. Conveniently located on the control cabinet are an E-Stop button, reset/hold, and power on/off switch.
 
See our loader/unloader in action.

 
 

Through-Spindle Parts Loader

Through-Spindle Loader
This is a floor-mounted unit, which is lagged to the floor in the space normally occupied by a bar feeder. This loader utilizes compressed air, which allows for its smooth operation. This air is channeled through a soft start regulator, which allows the unit to be brought up to pressure smoothly avoiding all sudden movements of the air cylinders insuring operator safety. Within the control cabinet is an Allen-Bradley Programmable Controller. Conveniently located on the control cabinet are an E-Stop Button, Reset/Hold, and Power On/Off switch.