Finished Parts Accumulation

Finished Parts Conveyor & Accumulation Table

Loader-Accumulation Table
Conveyor_Table2
Standard-Accumulation-Table
This option allows finished machined parts to be moved away from the parts unload drop zone. The conveyor is typically four feet long and is positioned up against the front of the lathe. Additional lengths are available. The conveyor transports parts to a mobile accumulation table or other accumulation system specified by you.

 
 

Finished Parts Accumulation Conveyor

Typically 6’-9’ long, parts accumulate on conveyor. It indexes and utilizes a sensor at the end of the conveyor to indicate a full condition, shutting off the load/unload system.

 
 

Finished Parts Conveyor & Multi-Row Accumulation Table

Large-Multi-Row-Accumulation-Table2
This option allows higher volumes of finished machined parts to be moved away from the unload drop zone. The conveyor can be varying lengths depending on space requirement and is positioned up against the front of the lathe opposite the raw parts in-feed system. It conveys finished parts to a multi-row accumulation table situated perpendicular to the finished parts conveyor. Via a pneumatic part pusher, parts are systematically removed from the conveyor and placed into rows on the accumulation table.

 
 

High Volume Multi-Row Accumulation System

Sub Spindle Accumulation Table2
This option allows higher volumes of finished machined parts to be moved away from the unload drop zone. The system can vary in size depending on space requirements and desired unattended run time. It can be positioned up against the front of the lathe opposite the raw parts in-feed system or on the right side of the lathe after sub-spindle extraction. Via a pneumatic part pusher, parts are systematically removed from the conveyance system and placed into rows on multiple shelves on the accumulation system.

 
 

Finished Parts Conveyor with Multi-Row Cleated Accumulation Conveyor

This option allows sensitive finished machined parts to be moved away from the parts catcher drop zone. The finished parts conveyor can be varying lengths depending on space requirement and is positioned up against the front of the lathe opposite the raw parts in-feed system. It conveys finished parts to a system of multiple cleated belt conveyors situated perpendicular to the finished parts conveyor. Via a pneumatic part pusher, parts are systematically removed from the conveyor and placed into rows on the accumulation conveyor. Sensitive parts sit in between cleats for protection. The accumulation conveyors will index per cycle on a progression equal to the on-center measurement between cleats until system is full.

 

These are a few of our solutions to handling finished parts. We have designed many solutions to a variety of unique applications. If you have an application that requires a solution other than what is listed here, contact us.